If you're vacuuming the house and notice it's not picking up dirt and debris like it should, there could be several different reasons for this issue that you can typically correct yourself. Instead of paying for an appliance repair service to correct the problem, check these tips to see if it's something you might be able to fix on your own. When a vacuum has lost its suction, it doesn't always mean that the machine is completely broken. Read on to find out more about some easy tips to help get your vacuum working again.
Clogged Filters
Most vacuum cleaners have an air filter and exhaust filter. If either of these filters are clogged, the appliance will not function optimally. Check your air filter for excess dirt and dust, and if it appears to be clogged, you should either clean it or replace it. The exhaust filter is what traps the particles as air flows through your vacuum cleaner. Read your owner's manual to find out the best way to clear it so your vacuum will work properly again. If you can successfully clean or replace these filters, the performance should improve.
Problems with the Hose
In many cases, vacuum cleaners lose suction because the hose has become clogged, and most people simply cannot see it. Hold a bright flashlight at one end of the vacuum hose and see if the light shines through to the other end. If you don't see any light, there is probably something lodged in the hose causing it to clog. It may take a little work on your part to dislodge whatever has gotten stuck, but you'll definitely notice improved suction when it's cleared. You can shake the hose vigorously to remove whatever is blocking it or push it out using a long, thin object like a broom handle.
Blower Wheel Problems
Most vacuum cleaners use a blower wheel to help the air flow through the machine. That wheel can get stuck on occasion, causing it to stop working properly. Take a look at the blower wheel and see if it's spinning freely when the vacuum cleaner is turned on. Look for any possible obstructions that could be keeping it from spinning all the way around and remove them. If you don't see anything blocking the wheel, it could be the blower wheel motor that is causing the issue. In that case, you'd probably want to get in touch with a company like Everett Vacuum LLC for repair.
Try these quick and easy troubleshooting tips and your vacuum cleaner should have improved suction.
